CM's Corp Excel Suit Spike and Daniel New Prototype Images

Almost 30 years..........

Almost 30 years..........

ISP brain fart...............sorry for the double post.

The worst example of a human in the series gets a toy.

It looks very awesome. However, I am force to pass because it's too big, wouldn't know where to place him. Even with MP figures, Excel suit is still too big. Scale it down to MP Rodimus waist and will capture my interest.

Well well,,,, it looks nice, but I'm sure these will not be in scale with other Transformers,,, the suit looks too big, I hope is not a voyager size, deluxe size will also be out of scale.

I already have a Transforming Exo-Suit Set of Spike & Danie made by impossible toys, imo this set represent a better scale when displayed with other Transformers.

It transforms? Ok, bought. Nice.

I think this looks awesome. I don't understand the "out-of-scale" comments when the last items made by this company were extremely out-of-scale but still very nice items. It's a specialty piece, it's not meant to be in-scale necessary but the fact that you get a more-or-less in-scale Daniel and Spike to Masterpiece Rodimus is really nice.

RhA wrote:The worst example of a human in the series gets a toy.

If Kicker of all people can get (three!) toys of his own, well...

RhA wrote:The worst example of a human in the series gets a toy.

On the bright side, you get to decapitate him for the "suite wearing" mode.

Now that we have better pics of the human figures, I now understand how it works, you rip off the heads and shoulders (check the crack lines) and then put them under the dome of the suite.
Keeping that in mind, just makes the size of the suite that much more perplexing, I would have understood the need to make it so large if it actually had to have space inside of it for the figures, but it doesn't, you only put the head in the dome. They could have made this scale to the MP line and Spike and Daniel could still have retained the size they have now.

This way it just looks odd, even on it's own, since in the movie it was much smaller (speaking in terms of human to suite ratio).

Still would have liked Spike and Daniel to have a bit of articulation.

Dead Metal wrote:Still would have liked Spike and Daniel to have a bit of articulation.

This! I will never understand how this brand has gone on for almost 30 years yet it seems so difficult to get a set of articulated humans. I would be fine with 3.75" figures in scale with G.I. Joes, Marvel Universe and Star Wars figures. As for scale, that'd be close enough so long as the humans are in scale with each other (i.e. Daniel should be smaller than Carly, Spike and Sparkplug. Archeville! Augie Cahnay! Kremzeek! Skuxxoid! Sleezardo! Bosch! Lord Gyconi! Slizardo! It seems like this should have been a convention set or a speciality shop set by now. This series or exclusive set could also feature the various Quintessons, B.O.T., the Unicron Trilogy kids/people, the RID people and T.A.I., the Beast Wars Cavemen, the VOK, Masterforce humans and Pretenders, the Animated humans and of course the TFP RID humans. Toss in parts for each set like some build-a-figure such as CHAOS, TORQ, Autobot Spike, Six-Gun or something along those lines and you've got yourself some nice collectibles. Heck, include various weapons packs, an extra Metroplex gun, chase Matrixes (sp?), Autoscout, Energon cubes, raw Energon crystals, an Allspark, Vector Sigma, etc would also be really nice to help these human based sets appeal to a larger crowd.

Seibertron wrote:

Dead Metal wrote:Still would have liked Spike and Daniel to have a bit of articulation.

This! I will never understand how this brand has gone on for almost 30 years yet it seems so difficult to get a set of articulated humans. I would be fine with 3.75" figures in scale with G.I. Joes, Marvel Universe and Star Wars figures. As for scale, that'd be close enough so long as the humans are in scale with each other (i.e. Daniel should be smaller than Carly, Spike and Sparkplug. Archeville! Augie Cahnay! Kremzeek! Skuxxoid! Sleezardo! Bosch! Lord Gyconi! Slizardo! It seems like this should have been a convention set or a speciality shop set by now. This series or exclusive set could also feature the various Quintessons, B.O.T., the Unicron Trilogy kids/people, the RID people and T.A.I., the Beast Wars Cavemen, the VOK, Masterforce humans and Pretenders, the Animated humans and of course the TFP RID humans. Toss in parts for each set like some build-a-figure such as CHAOS, TORQ, Autobot Spike, Six-Gun or something along those lines and you've got yourself some nice collectibles. Heck, include various weapons packs, an extra Metroplex gun, chase Matrixes (sp?), Autoscout, Energon cubes, raw Energon crystals, an Allspark, Vector Sigma, etc would also be really nice to help these human based sets appeal to a larger crowd.

That's the thing, How will they sell? Noone really knows who these people are besides hardcore fans of the series. Seems like to big a risk to make them anything but exclusives, and then you'll have people bitching when they can't get one and don't want to pay "scalper" prices and having to pay 50 bucks for one figure. Has/Tak can never win lol

Seibertron wrote:

Dead Metal wrote:Still would have liked Spike and Daniel to have a bit of articulation.

This! I will never understand how this brand has gone on for almost 30 years yet it seems so difficult to get a set of articulated humans. I would be fine with 3.75" figures in scale with G.I. Joes, Marvel Universe and Star Wars figures. As for scale, that'd be close enough so long as the humans are in scale with each other (i.e. Daniel should be smaller than Carly, Spike and Sparkplug. Archeville! Augie Cahnay! Kremzeek! Skuxxoid! Sleezardo! Bosch! Lord Gyconi! Slizardo! It seems like this should have been a convention set or a speciality shop set by now. This series or exclusive set could also feature the various Quintessons, B.O.T., the Unicron Trilogy kids/people, the RID people and T.A.I., the Beast Wars Cavemen, the VOK, Masterforce humans and Pretenders, the Animated humans and of course the TFP RID humans. Toss in parts for each set like some build-a-figure such as CHAOS, TORQ, Autobot Spike, Six-Gun or something along those lines and you've got yourself some nice collectibles. Heck, include various weapons packs, an extra Metroplex gun, chase Matrixes (sp?), Autoscout, Energon cubes, raw Energon crystals, an Allspark, Vector Sigma, etc would also be really nice to help these human based sets appeal to a larger crowd.

You forgot Cobra Commander/Snake

mooncake623 wrote:That's the thing, How will they sell? Noone really knows who these people are besides hardcore fans of the series. Seems like to big a risk to make them anything but exclusives, and then you'll have people bitching when they can't get one and don't want to pay "scalper" prices and having to pay 50 bucks for one figure. Has/Tak can never win lol

The build-a-figure or accessories would have to be things that collectors couldn't live without. Imagine a proper build-a-figure Six-Gun for Generations Metroplex or something along those lines. It couldn't just be a human figure pack ... there'd have to be things for the Transformers as well that you just had to have. If they could figure out how to do an actual build-a-figure Transformer toy for Jhiaxus, Scrounge, Rung, or some other character that fans would drool over, then you'd have a real winning set. Surely there'd be a market for something well thought out like this. I just find it hard to believe that the Transformers brand has to solely be about transforming robots especially with hard they push the humans in the cartoon series to us.

Seibertron wrote:

mooncake623 wrote:That's the thing, How will they sell? Noone really knows who these people are besides hardcore fans of the series. Seems like to big a risk to make them anything but exclusives, and then you'll have people bitching when they can't get one and don't want to pay "scalper" prices and having to pay 50 bucks for one figure. Has/Tak can never win lol

The build-a-figure or accessories would have to be things that collectors couldn't live without. Imagine a proper build-a-figure Six-Gun for Generations Metroplex or something along those lines. It couldn't just be a human figure pack ... there'd have to be things for the Transformers as well that you just had to have. If they could figure out how to do an actual build-a-figure Transformer toy for Jhiaxus, Scrounge, Rung, or some other character that fans would drool over, then you'd have a real winning set. Surely there'd be a market for something well thought out like this. I just find it hard to believe that the Transformers brand has to solely be about transforming robots especially with hard they push the humans in the cartoon series to us.

Wouldn't it be interesting to have a build a transformer toys shop or website? With 3d printing could hasbro make it work?

Seibertron wrote:

Dead Metal wrote:Still would have liked Spike and Daniel to have a bit of articulation.

This! I will never understand how this brand has gone on for almost 30 years yet it seems so difficult to get a set of articulated humans. I would be fine with 3.75" figures in scale with G.I. Joes, Marvel Universe and Star Wars figures. As for scale, that'd be close enough so long as the humans are in scale with each other (i.e. Daniel should be smaller than Carly, Spike and Sparkplug. Archeville! Augie Cahnay! Kremzeek! Skuxxoid! Sleezardo! Bosch! Lord Gyconi! Slizardo! It seems like this should have been a convention set or a speciality shop set by now. This series or exclusive set could also feature the various Quintessons, B.O.T., the Unicron Trilogy kids/people, the RID people and T.A.I., the Beast Wars Cavemen, the VOK, Masterforce humans and Pretenders, the Animated humans and of course the TFP RID humans. Toss in parts for each set like some build-a-figure such as CHAOS, TORQ, Autobot Spike, Six-Gun or something along those lines and you've got yourself some nice collectibles. Heck, include various weapons packs, an extra Metroplex gun, chase Matrixes (sp?), Autoscout, Energon cubes, raw Energon crystals, an Allspark, Vector Sigma, etc would also be really nice to help these human based sets appeal to a larger crowd.

This, a thousand times. The G1 humans at least are some of my favorite characters. There'd be a market for them!

WOW Ive been wanting this since I saw it in the movie. Heres your chance dr wu workshop. Make a spike and Daniel the same size as the partners set (spike and sparkplug). Then make exosuits they can fit into. They would fit perfect with the classics and generations line. Why did they make these so big? Its very frustrating waiting so long for the products you want.

Sabrblade wrote:

RhA wrote:The worst example of a human in the series gets a toy.

If Kicker of all people can get (three!) toys of his own, well...

I knew Kicker would come up and yes, he is terrible. But he's no 'Danno'. Close call, 'though.

mooncake623 wrote:That's the thing, How will they sell? Noone really knows who these people are besides hardcore fans of the series. Seems like to big a risk to make them anything but exclusives, and then you'll have people bitching when they can't get one and don't want to pay "scalper" prices and having to pay 50 bucks for one figure. Has/Tak can never win lol

3rd Parties to the rescue! Seriously, this "there isn't a market for it" argument (by yourself/Hasbro) seems contradictory when a 3rd Party comes along and makes the damn product(s). So either 3rd Parties are losing their shirts on these projects (and Hasbro is correctly sitting it out), or MAYBE... just MAYBE there IS a market for these figures. I think Hasbro should take a bigger interest in these requests, and figure out how the 3rd Parties can serve these niches, but they can't.

njb902 wrote:Wouldn't it be interesting to have a build a transformer toys shop or website? With 3d printing could hasbro make it work?

3D printing is right around the corner, so I'm very curious as to how it will change the game. But my guess? Hasbro will NOT adopt the new consumer model, and the various 3D prints we'll be sharing will be fan-made. I see a large distribution network of fan-designed heads and other parts, culminating in intricate TF redesigns. Now, whether or not we can print the pieces and assemble the toys correctly (and on the same quality level as a Hasbro/Takara product) is another question. But it's going to be an interesting future. 3D printing is going to be HUGE with consumers in general! With TFs?

RhA wrote:The worst example of a human in the series gets a toy.

So you can enact all your Dan-dying fantasies.

Mykltron wrote:

RhA wrote:The worst example of a human in the series gets a toy.

So you can enact all your Dan-dying fantasies.

Sold!

Metrosuplex wrote:

mooncake623 wrote:That's the thing, How will they sell? Noone really knows who these people are besides hardcore fans of the series. Seems like to big a risk to make them anything but exclusives, and then you'll have people bitching when they can't get one and don't want to pay "scalper" prices and having to pay 50 bucks for one figure. Has/Tak can never win lol

3rd Parties to the rescue! Seriously, this "there isn't a market for it" argument (by yourself/Hasbro) seems contradictory when a 3rd Party comes along and makes the damn product(s). So either 3rd Parties are losing their shirts on these projects (and Hasbro is correctly sitting it out), or MAYBE... just MAYBE there IS a market for these figures. I think Hasbro should take a bigger interest in these requests, and figure out how the 3rd Parties can serve these niches, but they can't.

What third party products are you talking about? We're talking about 3 and 3 quarter inch articulated human figures. Which third party made these? Impossible toys? their human figures are overpriced crap and they're not articulated and they're like 1.5 inches tall. and also they're out of business. I'm not saying there is no market for it. I'm just saying the market might be too small for Hasbro to create it for mass retail. Therefor if Hasbro are to give us what we want (articulated humans) they'll have to make small runs of them and make them exclusives.

Seibertron wrote:The build-a-figure or accessories would have to be things that collectors couldn't live without. Imagine a proper build-a-figure Six-Gun for Generations Metroplex or something along those lines. It couldn't just be a human figure pack ... there'd have to be things for the Transformers as well that you just had to have. If they could figure out how to do an actual build-a-figure Transformer toy for Jhiaxus, Scrounge, Rung, or some other character that fans would drool over, then you'd have a real winning set. Surely there'd be a market for something well thought out like this. I just find it hard to believe that the Transformers brand has to solely be about transforming robots especially with hard they push the humans in the cartoon series to us.

Hey that sounds awesome to me and I'm sure everyone on this site. But what you said build a figure do you mean something like the microns from the Takara AM line? I don't see that working for US retail... Maybe Takara will do it

mooncake623 wrote:Hey that sounds awesome to me and I'm sure everyone on this site. But what you said build a figure do you mean something like the microns from the Takara AM line? I don't see that working for US retail... Maybe Takara will do it

No, not model kit style. "Build-a-figure" means like how the Beast Wars 10th Anniversary Transmutate toy was done, with one body part coming with each main figure:

• Head - Waspinator
• Torso - Cheetor
• Waist & right leg - Rhinox
• Left leg - Tarantulas
• Right arm - Rattrap
• Left arm - Dinobot

It's been a while since we've had any updates on the CM's Corp Excel Suite Spike and Daniel figures, but thanks to TAGhobbywe have a new full color image of the set. This image also reveals a previously unseen items from the Transformers: Headmasters cartoon series. A prototype of Grand Galvatron! A wild scheme Galavatron cooked up in which he would incorporate the Earth and most of the Decepticon forces into a planet sized body for himself. Luckily for everyone his plan never came to fruition, but it looks like we can look forward to a toy version. Also hanging from the stand is the giant Master Sword floppy disk that Fortress Maximus handed over the Decepticons.

Check out the image mirrored below.

Hot dog! That looks beautiful! Why haven't I heard of this before?!

Completely forgot about these, they looks really good, just sadly too large for my collection

There's not just a Grand Galvatron (Oh god that was one of the dumbest yet awesomenest things ever) there is also a weird floppy disc hanging from a chain, right next to Galvy.
Looks kinda familiar.

Those are looking great! Was very happy with Minerva and have Ginrai on the way, and I'll be picking these up too.

Dead Metal wrote:Completely forgot about these, they looks really good, just sadly too large for my collection

There's not just a Grand Galvatron (Oh god that was one of the dumbest yet awesomenest things ever) there is also a weird floppy disc hanging from a chain, right next to Galvy.
Looks kinda familiar.

Good eye! I didn't even notice it, that's the giant floppy disk that Fort Max stored the Master Sword data on.

You really gotta live Spike/Daniel to want to buy huge a exo suit. I can understand something that scales with an exsisting line, but a huge stand alone figure that can beat the crap out of MP-10 ???

How many human fans are there really in the TF fandom ?

Or, if you prefer crack dubs:



Or screencap:

LOL, looks like mini-Galvatron is wearing one of those inflatable sumo-suits.

El Duque wrote:

Dead Metal wrote:Completely forgot about these, they looks really good, just sadly too large for my collection

There's not just a Grand Galvatron (Oh god that was one of the dumbest yet awesomenest things ever) there is also a weird floppy disc hanging from a chain, right next to Galvy.
Looks kinda familiar.

Good eye! I didn't even notice it, that's the giant floppy disk that Fort Max stored the Master Sword data on.

Wow, I don't even remember that, but I knew it had to be something from there.

GuyIncognito wrote:LOL, looks like mini-Galvatron is wearing one of those inflatable sumo-suits.

YES! Takara/Hasbro has given us our new Masterpiece Decepticon Leader Figure!!! It's better than Meg's, Galvy, or even Unicron, it's Gwando Garvatronu !!! (I love the Japanese accent. Ever heard what McDonalds sounds like in Japanese? ^^ If not, try looking it up on YouTube).

Tronus_Rex wrote:YES! Takara/Hasbro has given us our new Masterpiece Decepticon Leader Figure!!! It's better than Meg's, Galvy, or even Unicron, it's Gwando Garvatronu !!! (I love the Japanese accent.

Close, "Gurando Garubatoron".

Tronus_Rex wrote:Ever heard what McDonalds sounds like in Japanese? ^^ If not, try looking it up on YouTube).

"Makudonarudo"

Rated X wrote:You really gotta live Spike/Daniel to want to buy huge a exo suit. I can understand something that scales with an exsisting line, but a huge stand alone figure that can beat the crap out of MP-10 ???

How many human fans are there really in the TF fandom ?

More than you think, methinks.

Anyway, to be honest? I'm passing. I don't care too much about the exo-suit. Spike and Daniel basically being statues? Pass.

Sabrblade wrote:

Awesome clip! Thanks, Sabr!

Haha... looking for 100 yen coin... We need more of that in current TF shows!

Man, guess I should look for the HM series on DVD! I assumed it'd be derivative, Japan-centric garbage, but... ehhh, looks pretty good!

The Daniel/Spike exo suits, though? I can't help but wonder if someone is going to lose their shirt on this investment. If they nailed the scale (to be in line with MP), I could see it selling decently... but as it is now?

At first glance I thought it was a giant Cop-Tur Gobot....but its not.

El Duque wrote:It's been a while since we've had any updates on the CM's Corp Excel Suite Spike and Daniel figures, but thanks to TAGhobbywe have a new full color image of the set. This image also reveals a previously unseen items from the Transformers: Headmasters cartoon series. A prototype of Grand Galvatron! A wild scheme Galavatron cooked up in which he would incorporate the Earth and most of the Decepticon forces into a planet sized body for himself. Luckily for everyone his plan never came to fruition, but it looks like we can look forward to a toy version. Also hanging from the stand is the giant Master Sword floppy disk that Fortress Maximus handed over the Decepticons.

Check out the image mirrored below.

Wow this new pictures looks really awesome, I really like the fact that Spike and Daniel look just like they did in Headmasters !!! too bad the suit is way to big, and I do not collect any MP figures yet so I will have to wait a while for this set, Headmasters was a really nice series, I just finished watching it a few weeks ago and now I'm watching Supergod MasterForce

On the other side as for Galvatron,,,,,too bad His dreams of becoming Grand Galvatron were never fulfilled, lol, thanks to Sixshot and the Headmasters

CM's Corp has released new color images of their upcoming Excel Suit with Spike and Daniel figures, and this time we get treated to many pictures. The images show all the figures up close and personal as well as the alt mode and the arms transformed for weapon mode. The site lists a release date sometime in 2014 with price still to be announced.

But does it change into Arcee's head?

T-Macksimus wrote:WOW! Really?? Folks want full articulation AND posable figures that fit inside that DON'T look cheap and crappy, expect it to perform ALL the functions of its 1986 movie iteration, want it to be AFFORDABLE and STILL be in scale????



GOOD...F****NG...LUCK!!

Pick one or two and be happy that you even have one of these things AT ALL! You will NEVER get all of them together.

I don't want the damned suit. I would've loved a Spike and Danile by themselves a'la Minerva from before.

I don't care that they don't scale with anything else it's the fact it's out of scale with itself that bothers me. The exosuits were just that, a suit. It didn't make Spike or Daniel twice as tall as they were without it on. It was a human sized suit that gave the increased strength and could transform.

Trikeboy wrote:I don't care that they don't scale with anything else it's the fact it's out of scale with itself that bothers me. The exosuits were just that, a suit. It didn't make Spike or Daniel twice as tall as they were without it on. It was a human sized suit that gave the increased strength and could transform.

It might be a little off-scale, but not by much.





Besides, if this really was a true Iron Man-style suit of armor, what do you think would happen to Daniel's legs when it folds up?

The alt mode looks really cool. Too bad it's way out of scale with anything else. I'd love to have an MP-scale one, even if the suit wasn't removeable.

morphobots wrote:Besides, if this really was a true Iron Man-style suit of armor, what do you think would happen to Daniel's legs when it folds up?

It's a little-known fact that the designer of the suit was none other than Dr. Kintobor

I'm stoked they even made the thing. The size doesn't bother me much because if the suit were to be really created, chances are it would have increased in size thru progression as tech advanced. If Iron Man can upgrade his suits can't this have been upgraded. Kind of like a Pacific Rim type thing.

morphobots wrote:Besides, if this really was a true Iron Man-style suit of armor, what do you think would happen to Daniel's legs when it folds up?

I try not to worry about this. I know the comic explained that the Nebulans and Humans who became Head/Power/Boogie-Masters were altered through surgeries but the toon has them in their Exo-suits, that when they take the helmets off seem to be only slightly bulkier than normal clothes, and then transform into robot heads that are big enough for them to have a lazyboy and cup-holder inside. Even when the robots' heads aren't that big compared to the scale of the humans out of the suits.

Regardless, I think this looks good, but no place for it in my collection. I have the Impossible Toys versions of Spike and Daniel in their Exo-suits and would love (LOVE) GI Joes of these guys and a few other human-sized characters from the franchise, but these are not for me.

A huge Barbie doll sized exo-suit ? total fail....

How many hardcore Spike and Daniel fans are there out there ? I can probably count them on one hand. At least the Minerva doll had "assets" which helped move a few units.

CM Corp have posted a trio of new images that give us a look at the Grand Galvatron and Master Sword floppy disk accessories that will accompany their upcoming Spike and Daniel Excel Suit set. For those unfamiliar with these, both originate from the Japanese Transformers: Headmasters series. Grand Galvatron was a scheme Galavatron devised in which he would incorporate the Earth and most of the Decepticon forces into a planet sized body for himself. The Master Sword floppy disk contained data on the Master Sword, which Fortress Maximus was forced to hand over to the Decepticons. Check out the images mirrored below.

Grand Galvatron finally realized in plastic... I'm not sure whether to be happy... or horrified.