Seibertron.com Energon Pub Forums

News Credits: 17 · by **AcademyofDrX** » Wed Mar 24, 2021 9:05 am

Counterpunch wrote:
Seibertron wrote:
Counterpunch wrote:Another day, another lack of notice or anything.

Are you signed up with Fedex?

Yes dude. I'm 100% up to date, connected, and with it when it comes to this stuff.

My tracking # was generated on March 9th. It's in my account.

Nothing has changed since then, it's still pending.

EDIT: since the 8th.

Subsequent EDIT: I spoke to Pulse Customer Service and they said these are being shipped out geographically, which is super. Literally everyone I know in my local area has theirs or has it arriving today.

Am I irritated? Yeah, I am. I'm not even going to pretend to apologize about it. I don't care if it's later or earlier, I just want something to make sense and not be a big info void.

If it makes you feel any better, I'm in the same boat. I'm trying to be patient; logistically, I'm sure these are a lot more work than the average product.

For my part, I don't need to know anything until it has a delivery date. I've added the label details to the Shopify app, so as soon as there's an update, it'll push a notification to me.

News Credits: 317 · by **chuckdawg1999** » Wed Mar 24, 2021 12:10 pm

Counterpunch wrote:
Seibertron wrote:
Counterpunch wrote:Another day, another lack of notice or anything.

Are you signed up with Fedex?

Yes dude. I'm 100% up to date, connected, and with it when it comes to this stuff.

My tracking # was generated on March 9th. It's in my account.

Nothing has changed since then, it's still pending.

EDIT: since the 8th.

Subsequent EDIT: I spoke to Pulse Customer Service and they said these are being shipped out geographically, which is super. Literally everyone I know in my local area has theirs or has it arriving today.

Am I irritated? Yeah, I am. I'm not even going to pretend to apologize about it. I don't care if it's later or earlier, I just want something to make sense and not be a big info void.

*Puts arm around shoulder* It's ok bro, I've been there too, soon you'll have the big guy and will forget this all happened. *Refuses to let go of shoulder*

News Credits: 439 · by **Sabrblade** » Wed Mar 24, 2021 10:41 pm

Finally got another email from TFSource. They are ready to charge me. I just responded back to let them know I will pay with PayPal and now I'm just waiting to receive an invoice from them so I may finally pay.

While the total sum with shipping included is noticeably higher than that of Hasbro Pulse, it isn't as high as I was afraid it would be, and I saved enough over these past two years that this won't put a severe dent in my bank account.

I do still need to keep making room to display him, though.

News Credits: 3557 · by **Seibertron** » Wed Mar 24, 2021 11:27 pm

I silver sharpied his bottom teeth. Used a little masking tape and a wet q-tip to keep sharpie where it belongs. Looks fantastic. Glad I did. Pics coming soon!

News Credits: 3557 · by **Seibertron** » Wed Mar 24, 2021 11:31 pm

Sabrblade wrote:I do still need to keep making room to display him, though.

You have no idea! He's crazy big. You'll need more space than you think you need. I don't even know where he'll rest at Seibertron HQ!

News Credits: 1350 · by **ZeroWolf** » Thu Mar 25, 2021 2:18 am

Seibertron wrote:I silver sharpied his bottom teeth. Used a little masking tape and a wet q-tip to keep sharpie where it belongs. Looks fantastic. Glad I did. Pics coming soon!

Can't wait to see the pictures! He'll need a massive space for the photographs!

News Credits: 3557 · by **Seibertron** » Thu Mar 25, 2021 2:23 am

ZeroWolf wrote:
Seibertron wrote:I silver sharpied his bottom teeth. Used a little masking tape and a wet q-tip to keep sharpie where it belongs. Looks fantastic. Glad I did. Pics coming soon!

Can't wait to see the pictures! He'll need a massive space for the photographs!

I'm already at 270 photos and I haven't even transformed him yet! Lots of comparison pics and some fun pics.

News Credits: 1350 · by **ZeroWolf** » Thu Mar 25, 2021 2:48 am

That's going to be a massive gallery, well deserving of the chaos bringer!

News Credits: 439 · by **Sabrblade** » Thu Mar 25, 2021 9:05 am

Seibertron wrote:
Sabrblade wrote:I do still need to keep making room to display him, though.

You have no idea! He's crazy big. You'll need more space than you think you need. I don't even know where he'll rest at Seibertron HQ!

I plan to put him where most of my Titans currently are, so I gotta make room to move them over to a new spot and then add some extra room for Unicron to fit where they were. I'm keeping his robot mode and planet mode dimensions in mind to make sure that he can fit where I need him to. But it is definitely a challenge trying to make that much room for him.

News Credits: 125 · by **Counterpunch** » Fri Mar 26, 2021 9:56 am

Update: No change.

So...no update.

News Credits: 439 · by **Sabrblade** » Fri Mar 26, 2021 10:16 am

TFSource has finally charged me. The previous email said that they plan to ship out all orders for Unicron on Tuesday March 30th.

News Credits: 4 · by **Chriphord** » Fri Mar 26, 2021 12:48 pm

I’ve gotten no word from BBTS at all. I’m assuming that they’re gonna get it later than some of the etailers. They’ve been really slow on getting stuff recently.

News Credits: 3557 · by **Seibertron** » Fri Mar 26, 2021 1:46 pm

A ginormous weird lookin' planet just showed up in the galleries of Seibertron.com! The first part of our MASSIVE gallery of Transformers War for Cybertron Trilogy UNICRON is now available for your viewing pleasure. Part one of our two-part gallery features Unicron's planet mode. This is the only gallery you'll need to see of Unicron as we pulled out all of the stops to bring you comparisons galore.

Originally available to pre-order from HasLab's crowdfunding opportunity way back in 2019, the evil planet eating chaos bringer UNICRON has arrived at long last.

Devour our comprehensive photo shoot comparing Unicron to various incarnations of Unicron along with other Transformers action figures including an homage to the Transformers The Movie 1986 poster, eating Cybertron (Primus), holding Armada Unicron with his horns, macro close-ups of the extremely tiny Galvatron and Hot Rod mini-slugs, as well as the miniature Autobot Shuttle, and a whole lot more. We even busted out the silver sharpie to fix his bottom teeth!

If you missed out on Unicron or want a second one, dozens are available at crazy after market prices on eBay currently.

Over 285 photos are currently available. Without further ado, here are some highlights from Unicron's gallery so far. Make sure to swing by our forums to share your thoughts about this incredible figure that is the stuff of dreams.

Check back in a few days to see the second part of our gallery featuring Unicron's robot mode.

War for Cybertron: Trilogy Unicron (288 images) - Miscellaneous

News Credits: 439 · by **Sabrblade** » Fri Mar 26, 2021 2:01 pm

This kind of awesome stuff is exactly what I've been looking forward to. Bravo, man. Well done--Wait.

What about Welcome to TF 2010 Unicron? :???:

News Credits: 3557 · by **Seibertron** » Fri Mar 26, 2021 2:03 pm

Sabrblade wrote:

Unfortunately I sold it to ScottyP a couple of years ago. Just ordered another one this week though!

News Credits: 6 · by **TulioDude** » Fri Mar 26, 2021 2:03 pm

News Credits: 439 · by **Sabrblade** » Fri Mar 26, 2021 2:05 pm

Seibertron wrote:
Sabrblade wrote:

Unfortunately I sold it to ScottyP a couple of years ago. Just ordered another one this week though!

Awesome Possum! :APPLAUSE:

News Credits: 1350 · by **ZeroWolf** » Fri Mar 26, 2021 2:10 pm

Greetings Seibertronians!

Well the time is upon us, the end is very well beyond nigh for a chosen few. HasLab Unicron is Shipping out across the world and reviews are cropping up. We've already seen fellow Seibertron user, and YouTube toy reviewer, PrimeVsPrime's review but to wet your appetite for his arrival (or make you glad you didn't back this behemoth) here's a round up of all the latest Unicron reviews!

Thanks to fellow Seibertron user, transformnerd114, we've learned that Peaugh, has uploaded his review of the chaos bringer!

There's also a review by Samus Ng.

One by M3 Reviews (Done with Pop The Trunk Toys).

...And another one by Mad Hatter Reviews.

If all those reviews are still not enough to wet your appetite,then check out Seibertron's own HasLab Unicron gallery here! While this is only photos of Unicron's gorgeous planet mode, there's more then enough to feast your eyes on!

Are you awaiting the chaos bringer? Have you already got yours? Glad you haven't got it?

Shout out in the Energon Pub and stay tuned to Seibertron for all the latest news and reviews!

News Credits: 1 · by **Regimus Prime** » Fri Mar 26, 2021 2:12 pm

FINALLY!!! #toysnoiseandactionfigures

https://youtu.be/AG059n6oXZU

News Credits: 18 · by **Immortal Starscream** » Fri Mar 26, 2021 2:29 pm

Well, might as well toss mine in the mix. not so much a review as much as an unboxing and fist impressions:

https://youtu.be/ysJfl2ZU79w

MyFigureCollection.net collection · by **Emerje** » Fri Mar 26, 2021 2:43 pm

Counterpunch wrote:Update: No change.

So...no update.

Same. Sounds like people who bought from TFSource are going to get them before some of us who ordered direct from Pulse. [-(

Emerje

News Credits: 3 · by **alekese** » Fri Mar 26, 2021 2:52 pm

Mine from pulse came in today, in an additional plain cardboard box. Promised a friend who wasn't able to afford it that i'd have him there to help unbox it, so i won't be opening that gorgeous inner box until next weekend when he gets in town. Super stoked!

News Credits: 1 · by **Gauntlet101010** » Fri Mar 26, 2021 3:14 pm

What, no comparison with McDonald's Unicron?

How well does it hold Primus? And Armadacron? It looks pretty secure .... is that just photo magic?

News Credits: 439 · by **Sabrblade** » Fri Mar 26, 2021 3:18 pm

Could someone who has Unicron right now in planet mode take some measurements for me?

I need to know how tall the planet mode on its stand is from the bottom of the stand to the top north pole of the planet mode's surface, not counting the top ring.

And how many inches away from the planet's surface the rings stick out (basically, how long each of the four connector pieces are).

News Credits: 55 · by **o.supreme** » Fri Mar 26, 2021 4:24 pm

Simply amazing pics. I can't imagine how much time it took, but thank you. Unfortunately it does bring to mind that an equally sized Transforming Cybertron/Primus is needed, but will likely never happen. As strong as the nostalgia is for the 1986 TF:TM, THIS Haslab project came very close to not happening. I can't imagine Hasbro taking another even larger risk. Most of their other Haslab projects have funded with no issue (I think Cookie Monster was the only outright failure so far).